16th EDF – Pprime Workshop - Sciencesconf.org

Enregistrement

Enregistrement et retrait des badges à l'accueil. (Hall IFMI)

4 : Vibration, dynamique et conception de paliers

IFMI Amphi

Chairman: .................... Andreas Schubert

› Effect of Dimple Depth on the Dynamic Characteristics of Fully Textured Journal bearings - Hiroo Taura, Nagaoka University of Technology 08:00-08:30 (30min)

› Case study about Oil Whirl on a gas compressor - nicolas peton, GE, DS, Bently Navada - Sergey Drygin, GE, DS, Bently Navada 08:30-09:00 (30min)

› Implementation of a four-wedge bearing R4T on high-pressure turbines of large steam turbine generators up to 1100 MW / 3000 rpm - Josef Huster, GE Power AG, Dept. of large Steam Turbines, GE Power AG, 5401 Baden, Brown Boveri Str. 7, Switzerland 09:00-09:30 (30min)

› Design optimization of an automotive turbocharger thrust bearing using a CFD-based THD computational approach - Anastassios Charitopoulos, National Technical University of Athens - Christos Papadopoulos, National Technical University of Athens 09:30-10:00 (30min)

Pause café - Discussions - Session Affiches

IFMI Hall

5 : Effets thermiques pour un écoulement laminaire et turbulent

IFMI Amphi

Chairman: ........................................................................................................................... Amine Hassini

› Theoretical transient thermal studies on an eight-pad thrust bearing - Christopher Zeh, Institute of Tribology and Energy Conversion Machinery, Clausthal University of Technology 10:30-11:00 (30min)

› Field tests on hydrodynamic and hybrid operation of a bi-directional thrust bearing of a pump-turbine - Michał Wodtke, Faculty of Mechanical Engineering, Gdańsk University of Technology 11:00-11:30 (30min)

› Improvement of the thrust bearing calculation considering the convectional heating within the space between the pads - Andreas Schubert, GE Renewable Energy 11:30-12:00 (30min)

› THD analysis of a LEG TPJB considering both laminar and turbulent flow - Philip Croné, Division of Machine Elements, Luleå University of Technology 12:00-12:30 (30min)

Déjeuner - (Restaurant de l'Hôtel Plaza)

Restaurant of Plaza Hotel

6 : Comportement dynamique et paliers contrôlables

IFMI Amphi

Chairman: ........................................................................................................ Christos Papadopoulos

› Controllable Sliding Bearings & Controllable Lubrication Principles – An Overview - ILMAR SANTOS, Technical University of Denmark 14:30-15:00 (30min)

› Comparison of Reynolds Equation and CFD Simulations for Evaluation of a Grooved Journal Bearing with Injection - Kristopher Person, The University of Akron 15:00-15:30 (30min)

› Real-time alignment and operation optimization of turbine shaft trains using adjustable bearings - Athanasios Chasalevris, General Electric Co. 15:30-16:00 (30min)

› Characterization of high power turbomachinery tilting pad journal bearings: first results obtained on a novel test bench - Enrico Ciulli, Department of Civil and Industrial Engineering, University of Pisa - Paola Forte, Department of Civil and Industrial Engineering, University of Pisa 16:00-16:30 (30min)

Prix du Meilleur Poster de la SF ASME - Clôture

IFMI Amphi

Speaker: ..................................... Michel Fillon

Visite des nouveaux bancs d'essais de Tribologie (PROMETEE)

Programme