16th EDF – Pprime Workshop - Sciencesconf.org

›7:30 (50min)

Registration

7:30 - 8:20 (50min)

Registration

Registration at reception desk. (IFMI Hall)

›8:20 (20min)

General introduction by EDF, University of Poitiers, UFR SFA and Pprime Institute (Amphi IFMI)

› IFMI Amphi

8:20 - 8:40 (20min)

General introduction by EDF, University of Poitiers, UFR SFA and Pprime Institute (Amphi IFMI)

IFMI Amphi

›8:45 (50min)

Keynote
Chairman: ....................................................................... Azzedine Dadouche

› IFMI Amphi

8:45 - 9:35 (50min)

Keynote

IFMI Amphi

Chairman: ....................................................................... Azzedine Dadouche

› Special operating conditions of bearings: Application to tilting pad thrust bearings of vertically aligned hydro machines - Andreas Schubert, GE Renewable Energy 08:45-09:25 (40min)

›9:35 (15min)

Presentation of ISO Standards on journal and thrust bearings
Speakers: ........................................................................................ Nadiège Ludivion - Michel Fillon

9:35 - 9:50 (15min)

Presentation of ISO Standards on journal and thrust bearings

Speakers: ........................................................................................ Nadiège Ludivion - Michel Fillon

›9:50 (10min)

Presentation of the Posters -
Speaker: .................................................... Jean Bouyer

› IFMI Amphi

9:50 - 10:00 (10min)

Presentation of the Posters -

IFMI Amphi

Speaker: .................................................... Jean Bouyer

›10:00 (30min)

Coffee break - Discussions

› IFMI Hall

10:00 - 10:30 (30min)

Coffee break - Discussions

IFMI Hall

›10:00 (30min)

Posters

› IFMI Hall

10:00 - 10:30 (30min)

Posters

IFMI Hall

› A numerical model of mechanical interaction of rough surfaces of the journal bearings of the piston engine - Konstantin Gavrilov, South Ural State University (National Research University) 10:00-10:30 (30min)

› Comparison of perturbed Reynolds equation and CFD models for the prediction of dynamic coefficients of sliding bearings - Troy Snyder, The University of Akron 10:00-10:30 (30min)

› Effect of the sliding element surface texture on the oil film thickness under starved lubrication conditions - Lidia Galda, Rzeszow University of Technology 10:00-10:30 (30min)

› Influence of speed on the static performance characteristics of hole entry worn hybrid conical journal bearing - Vikas Phalle, Dept. of Mechanical Engineering, VJTI, H.R. Mahajani Marg, Matunga, Mumbai-400019 - Sanjay Pawar, Dept. of Mechanical Engineering, VJTI, H.R. Mahajani Marg, Matunga, Mumbai-400019 - Prashant Khaske, Air India Engineering Service Ltd, Mumbai,400029 10:00-10:30 (30min)

› Investigation of the effect of non-isothermal flow of non-Newtonian fluid in a thin layer on thermal state and working ability of the tribo-unit - Elena Zadorozhnaya, South Ural State University 10:00-10:30 (30min)

› Misalignment cases on machine trains of CC Power Plants - nicolas peton, GE, DS, Bently Navada - Francesco Miniello, GE, DS, Bently Navada 10:00-10:30 (30min)

› Non-invasive in-situ measurement of lubricant film thickness and viscosity for hydrodynamic bearings - Henry Brunskill, Leonardo Centre for Tribology 10:00-10:30 (30min)

› Non-stationary oil film force database for hydrodynamic journal bearing - Wen Wang, Shanghai University 10:00-10:30 (30min)

› Predicting lifetime of IC engine crankshaft connecting rod bearings at the design stage - Igor Levanov, South Ural State University (National Research University) 10:00-10:30 (30min)

› Probe track run-out identification and compensation to benefit machinery diagnostics - nicolas peton, GE, DS, Bently Navada - Paul Barrowclough, GE, DS, Bently Navada 10:00-10:30 (30min)

› Substantiation of reduction of mixed lubrication effect in hybrid bearings based on the load separation principle - Roman Polyakov, Orel State University named after I.S. Turgenev 10:00-10:30 (30min)

›10:30 (1h30)

1: Transient and mixed lubrication regimes
Chairman: .................... Nicolas Péton

› IFMI Amphi

10:30 - 12:00 (1h30)

1: Transient and mixed lubrication regimes

IFMI Amphi

Chairman: .................... Nicolas Péton

› Theoretical and experimental investigations on transient run-up procedures of journal bearings including mixed friction conditions - Maximilian Prölß, Institute of Tribology and Energy Conversion Machinery, Clausthal University of Technology 10:30-11:00 (30min)

› Friction and wear analysis of journal bearings exposed to repeated start and stop cycles - David Sander, Virtual Vehicle Research Center 11:00-11:30 (30min)

› Analysis of bearing seizure of a PTFE central groove journal bearing during startup period - Bálint Pap, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI, Safran Transmission Systems - Maxence Guillemont, Safran Transmission Systems 11:30-12:00 (30min)

›12:15 (1h30)

Lunch - (Restaurant of Plaza Hotel)

› Restaurant of Plaza Hotel

12:15 - 13:45 (1h30)

Lunch - (Restaurant of Plaza Hotel)

Restaurant of Plaza Hotel

›14:00 (1h30)

2: Bearing failures
Chairman: .................................................................. Edgar Gust

› IFMI Amphi

14:00 - 15:30 (1h30)

2: Bearing failures

IFMI Amphi

Chairman: .................................................................. Edgar Gust

› Toward Quantitative Analysis of Thrust Shoe Damage - Lyle Branagan, Pioneer Motor Bearing Company 14:00-14:30 (30min)

› Hydrodynamic film thickness measurements and CFD analysis identify the root causes of repetitive thrust bearing failures on 45 MW hydro generating unit at Hydro-Québec - pierre gauvin, Hydro-Québec Production, Expertise de Centrales 14:30-15:00 (30min)

› Nano-soldering pseudo-composite material to decrease engine bearing failure - Paul OLARU, SETEC 15:00-15:30 (30min)

›15:30 (45min)

Coffee break - Discussions - Posters Session

› IFMI Hall

15:30 - 16:15 (45min)

Coffee break - Discussions - Posters Session

IFMI Hall

›16:15 (1h30)

3: Bearing materials and water lubricated bearings
Chairman : ........ Lyle branagan

› IFMI Amphi

16:15 - 17:45 (1h30)

3: Bearing materials and water lubricated bearings

IFMI Amphi

Chairman : ........ Lyle branagan

› New high strength white metal bearings applicable to higher performance machinery - Kazuaki Toda, RESEARCH & DEVELOPMENT DEPT. 16:15-16:45 (30min)

› Development of lead free sliding bearing materials for high dynamic loads: - Edgar Gust, Edgar Gust 16:45-17:15 (30min)

› Polymer journal bearings behaviour research under limited lubrication and cooling conditions conducted on high torque test rig - Agnieszka Barszczewska, Faculty of Ocean Engineering and Ship Technology, Gdansk University of Technology 17:15-17:45 (30min)

›18:15 (5h15)

Departure for the Car Museum and dinner (mandatory registration)

18:15 - 23:30 (5h15)

Departure for the Car Museum and dinner (mandatory registration)

- Bus in front of IFMI building